How To Remove Faucet Handle Without Screws?

Screwless faucet handles are a wonderful invention. They are a common design for those who want to make their bathroom look as sleek and modern as possible. They’re convenient and easy to use, but if you ever lose the handle or it breaks, how to remove faucet handle without screws?

So how do you remove faucet handles without screws?

Though there is no right answer to this question, we will provide some helpful tips below on how to remove a screwless faucet handle so that you can easily change these handles without damaging them.

How To Remove Faucet Handle Without Screws?

Here are the Steps on How to Remove Faucet Handle ?

Gathering Your Tools

As always, gathering all the necessary tools is very important. You want to have these items ready so that you can do this job quickly and efficiently:

  • A handle puller
  • Adjustable wrench
  • Flat-head screwdriver
  • pliers
  • An Allen wrench.
  • A clean cloth
  • Distilled white vinegar or metal cleaning detergent

Find the Faucet Cap

The first step in removing a faucet handle without screws is to find the necessary key. Typically, this will be a faucet cap and/or an inner set screw.

Most bathroom and kitchen sink handles have a decorative cap on top with a hole in them. This hole can vary from very small to large enough to fit your whole hand through.

Most handles also have an invisible set screw located on the actual faucet knob.

This is the center part of the handle that attaches directly to the faucet body and where you can twist it to turn on or off.

Find the Faucet Cap

Remove the Cap

The cap will typically unscrew counterclockwise, but it may be necessary to hold the handle in place while you screw off the decorative cap.

Take your time turning this counterclockwise because they are often stiff and difficult to remove.

Turn off the Water

Now that you’ve removed the cap, you will need to turn off the water supply for your sink before removing any of the internal parts.

The most common method for doing this is by turning the knob on top of your faucet handle until it’s completely closed.

This turns off all water coming into your home or apartment through your water valves. Often there is an indicator next to this knob showing what position it should be set in when not being used so you can easily check if it is closed or not.

Turn off the Water

Remove the Inner Set Screw

Now remove the inner set screw from your faucet handle: This can be done with a standard Allen wrench and is found by following down inside the hole in your faucet until you find it.

To help, try to twist your Allen wrench so that it’s making as much contact with your screw as possible: If done correctly, this will make getting it out easier and less time-consuming.

Take off the Faucet Handle

At this point, you should have both of these pieces removed and can now take off the actual knob that was connected to them. This part typically unscrews counterclockwise as well and should come right off after you remove the screw.

Clean Your Screwless Faucet Handle

Remove all of the previous parts and give your tap handle a thorough cleaning with metal cleaner or distilled white vinegar to make sure it’s as clean as possible for when you put it back together.

Then go ahead and reassemble everything, starting with screwing in the inner set screw first: Then replace your cap and give that a good twist counterclockwise until it feels snug again.

Next, attach your faucet knob to this part by twisting it clockwise. We recommend tightening this knob as much as possible without stripping the screws because these tend to come loose easily.

They can cause leaks or other problems down the road if not tightened well enough. Finally, flip on your water supply and see if everything is working properly.

Clean Your Screwless Faucet Handle

How Do You Remove A Stripped Faucet Handle?

To remove a stripped faucet handle without screws, it may be necessary to drill out the screw. However, this can leave the handle without any threads left for a new screw to thread into.

To fix this, use a dowel handle. This is just a wooden plug that you can drill into the hole left by the stripped screw so that you can attach a new handle. To learn more, continue reading!

Drill Out the Old Screw

If your faucet handle won’t budge or keeps turning, but the screw won’t come out, you may need to drill it out. Use a drill bit slightly smaller in diameter than the screw.

Gently drill through it by hand to remove the head of your screw to access the screws inside. After you’ve drilled enough of the screw out, you should be able to remove it with needle-nosed pliers or tweezers easily.

Drill Out the Old Screw

How Do You Reverse A Faucet Handle?

If your faucet handle turns the opposite way as it normally does, you can quickly and easily reverse it by taking it apart and swapping out certain pieces.

Step 1 – Turn Off The Water Supply

Start at the base of your faucet. Look for the water knob that turns off the water supply to your entire household or apartment. Turn this until it is tightly closed.

Step 2 – Remove The Faucet Handle Cap Using Flat Head Screwdriver

Once you shut off valves, remove the faucet handle’s cap from around your handle using a flat head screwdriver, if needed. If you have one of the newer models with a screwless design, then you will most likely lift it off.

Step 3 – Remove The Faucet Handles

There is typically one more piece to remove, which is the actual handle itself. Remove the screw from the inside of the handle that holds everything together with an hex wrench or Allen key or a faucet handle puller.
Then gently pull off the cap and unscrew the inner screw just like you would to take it apart normally. Once it’s unscrewed, you can remove your loose faucet handle and replace it.

Step 4 – Reverse The Faucet Cartridge

Your last step is to reverse the way that your faucet cartridge are facing and place it back into place on your sink.
Gently screw the inner set screw into the cap before replacing the cap itself on top of that. Now your faucet handles will turn in a different direction!
Then, turn the water supply back on and see if it works. If not, then check that you have everything in place properly.

How Do You Loosen A Moen Faucet Handle?

To loosen a Moen bathroom faucet handle, start by turning the water off to the faucet handle. Then, remove any decorative pieces or caps from around your handle and unscrew the handle.

Next, remove the inner set screw inside of it before removing the last part, which is typically a cap that houses this piece. Now you should be able to pull out your old handle and replace it with your new one!

To learn more about replacing a stripped faucet handle, head over to our blog now! If none of these solutions work for you, or if you would rather have us take care of the problem for you, give us a call today to schedule an appointment!

How Do You Loosen A Moen Faucet Handle?

Leave a Comment